Since the discovery of the deadly effects asbestos has on health, the Department of Environmental Quality (DEQ) has created regulations to control the management, removal and disposal of asbestos material. One of the materials containing asbestos is vinyl floor tile (VAT). To handle them safely it is important to ensure that the material is in non-friable state. If the material is friable, the asbestos fibers can be freed when smashed. Generally, VAT is regarded as non-friable if it is not damaged.

When removing asbestos floor tiles, some problems might arise that can be potentially hazardous. Some of the difficulties that you will have to tackle are breathing through respirator which demands a greater effort from the heart and lungs. The vision is reduced because of the use of safety glasses.

The removal of VAT has to be done in whole pieces in order to be regarded as non-friable. It vital that in the process of abatement the tiles are not sawed, drilled or reduced to dust.

Before starting the work, it is important to isolate other materials with a plastic cover to avoid the fibers to move. Place a different sheet of plastic in the area where the tiles are to be kept.

The material that is being removed should be wetted with a hose or any other tool to prevent them from becoming airborne. The tiles removed should be kept as intact pieces.

The tiles should be put in leak proof containers such as plastic bags and the sign “ DANGER ASBESTOS-CONTAING MATERIALS” must be placed on the container.

This entry was posted on Tuesday, May 20th, 2008 at 9:06 am and is filed under Asbestos. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.